The way to connect O-ring Chains Remarks to connect basic O-ring Chains

1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease in the pins. Before connection, verify the grease within the surfaces of pins, and when the quantity of grease is modest, apply grease with bare hands. (If gloves are utilized, the grease will probably be absorbed by the gloves.)
Example: Once the connecting website link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted on the roots of your pins. In case the O-rings come loose as a consequence of vibration throughout transport, refit the O-rings in for the roots from the pins.
In this case, be sure to return the grease collected on the roots in the pins to your central surfaces on the pins, additional at portion A than at portions B proven from the above illustration. (Portions A is worn due to sliding using the bushings.)
two.The chain is often most easily connected on the teeth of the sprocket. Engage the back links at each ends with the chain with the sprocket teeth and fit connecting pins. If the sprocket might be moved, the chain may also be linked about the loosened side.
three. Connecting process
1.Confirm that O-rings are connected for the roots of the pins.
2.In case the level of grease applied over the connecting pins is tiny, coat the pins with grease at the central portions.
three.Insert the connecting pins to the bushings in the inner back links at the two ends.
4.Verify the grease is utilized on the whole face on the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and whilst pressing the connecting plate, set up the spring clip. Confirm regardless of whether the head (the finish with no split) on the spring clip is turned inside the feeding course with the chain. (See the following illustration.)
six.Be sure to confirm that the spring clip is securely fitted inside the clip grooves in the connecting pins.
This completes jointing with the connecting link. Note that grease on the surfaces of connecting pins and O-rings may be eliminated in the course of set up function. In this instance, re-grease using the grease within the surface from the base chain or the grease from the polyethylene bag through which the connecting website link was contained.