This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for make use of with state-of-the-art servo electric motor technology, providing tight integration of the electric motor to the machine. Angular backlash of significantly less than 1 arc-a few minutes is provided standard.

They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of electric motor couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore result can be used to mount output shafts, pinion shafts, or other drive elements.

Typical applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and decrease the expenditure for valuable installation space.

The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This can be due to the longitudinal app of drive on the input shaft. This enables torque impulses to be prevented effectively and for optimum results when it comes to running smoothness and sound reduction to be performed.

Both the gear unit, and the synchronous servomotor derive from our modular system. This allows you to have fully individual configuration possibilities for each application. One factor is certain – Our servo gearmotors are true specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, acceleration reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the kind of a screw, also known as a worm, meshes with a worm gear. These gears are usually created from bronze and the worms are steel or stainless steel.

While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is definitely that they create an output that’s 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to change the direction of the result, a left-hands thread worm gearbox is required.
Sometimes a motor’s capability may be limited to the point where it needs gearing. As servo manufacturers develop more powerful motors that can muscles applications through more complicated moves and create higher torques and speeds, these motors need gearheads add up to the task.

To discover even more concerning worm drive servo, visit our website.